Manicure hood TUFI profi PREMIUM ND900FC desktop with filter and metal grid white 95 W (0306921)

In salons where the main procedures are manicure and pedicure, most often in the air gets dust from the processing of artificial coatings on the nails. In order to avoid air pollution and to keep the room always clean and fresh manicure hoods are installed.

Hood TUFI profi PREMIUM ND900FC - a necessary device for any nail-master who uses a cutter. During manicure procedures, a huge amount of dust is generated, which affects the respiratory tract of the client and the master, and negatively affects health in general. Manicure extractor is a convenient, powerful device will save cleanliness both at the workplace of an amateur and a master-professional. Hood TUFI profi PREMIUM has a special shape, the client will be able to put your hand on it when carrying out build-up or decorative treatment, which is very convenient. The body of the hood is made of quality materials, the grate is made of metal.

Equipment:

• manicure hood 1pc.
• HEPA dust filter 1pc.
• Operating instructions 1 pc.
• Power cord 1 pc.

Characteristics:

Color	white
Power	95 W
Type of power supply:	220 V (60 Hz)
Hood type	embedded
Number of speed modes	2
Filter	1 pcs
Noise level	up to 45 dB
Revolutions per minute	3300
Volume of filtered air	450 m2 per hour
Diameter of the fan	170 mm
Size	23×20 cm
Speed controller	have
Package size	25х26х10 cm
Manufacturer	TUFI profi

Instruction for use:

1. The filter must be installed inside the hood before starting work;
2. Place the hood on the table surface or attach it to the table and plug it into the outlet;
3. Place the client's hands on the manicure hood and start the procedure
4. Turn off the device when you have finished working.

How to properly use and care for the stainless steel grille panel (hereinafter referred to as the panel):

• Use a neutral detergent to clean stainless steel.
• Avoid disinfecting liquids and powders containing chlorine, as chlorides can damage stainless steel.
• Use only soft materials to clean stainless steel.
• Beware of using paper towels as they can leave scratches on the surface of the steel.

Instructions for installation of the recessed cooker hood (ND900FC):

1. It is recommended to place the upper panel of the master hood at a distance of 7-10 cm from the edge of the table. To try it on - attach the panel and move it in front of you (from the master position) to choose the most comfortable position.
2. Fix the position of the panel and mark the holes around the perimeter for the self-tapping screws with a pencil.
3. Using the template included in the kit, outline the perimeter of the hole.
4. Attach the supplied mounting brackets to the hood body. To do this, remove the end screws from the housing and use them to fasten the corners.
5. Tape the supplied gasket around the perimeter at the top of the hood body.
6. Cut out the hole with a jigsaw or milling machine. Once the hole has been cut, fix the hood (using the self-tapping screws provided) to the inside of the table so that the center of the drilled hole is clearly in line with the fan.
7. Fix the grille according to the predetermined marks.

Please note! To fix the grid correctly, it must be pressed slightly against the table!